What Problems Should Be Paid Attention To When Choosing A Pipe Bender?

The main function of the pipe bender is to bend steel pipes such as square pipes, flanges, and round pipes according to regulations. It is mainly used for installing pipes in factories, docks, vegetable greenhouses, warehouses, railways, buildings, automobiles, etc. , What problems should we pay attention to when choosing a hydraulic square tube bender?

1. The noise and noise of the hydraulic square tube bender is inevitable after each machine is opened. The noise should conform to the rules of ZB J62 006.5, and the measurement method should conform to the rules of JB 3623.

2. Check the function of the machine, including the reliability of various limit, interlock, overload protection devices and emergency stop buttons; check the clamping block and clamping release, arm rotation and mandrel advance and retreat, etc. The sensitivity and reliability of the action specification; check the sensitivity of each adjustment device; check whether the electrical equipment is in good condition, and check whether the subordinate equipment is sensitive and reliable.

3. The appearance of the machine, the pattern should be free of protrusions, roughness and depressions. The seams should be leveled. There should be no dislocation of the exposed combined surface, and there should be no bumps, scratches and rust on the more obvious exposed surfaces.

4. It is to check the quality of the machine installation, use the empty operation experiment, each machine needs an empty operation experiment, the time should not be less than four hours, the experiment time of each sub-program action should not be less than one and a half hours, and the operation must be strictly controlled. The work procedure is carried out in sequence.

5. Each machine must pass the inspection department's strict inspection before leaving the factory.

6. The process of purchasing a machine: selecting the machine - contacting the seller - on-site inspection - buying and selling - shipping from the manufacturer - receiving the goods - perfect after-sales service