Tape slitting machine is an important equipment in paper processing industry, tape manufacturers almost every day to use this equipment, if there is a fault will cause obstacles to the production process, manufacturers will also have losses. Generally speaking, if the ordinary staff do not pay attention to the daily maintenance, the cutting machine will often appear some thorny problems, in order to solve these small problems from time to time, we summarized the following points are more often encountered problems for your reference, I hope to help you:
First, the tape cutting machine is not neat. This situation is mostly due to the paper core is not applicable, as long as the replacement meets the requirements of the inner diameter of the paper core, in addition to the use of rewinding roller in the rewinding process, can also avoid the slitter rewinding machine.
Second, the meter count is inaccurate. This problem can be the meter wheel both wheels at the same time contact with the feed cots, and on the meter wheel to make a mark to roll 5 for the meter meter meter or replace the meter.
Third, cut the volume of the material from the trend. This is mainly the winding tension is not right, adjust the appropriate winding tension of the paper cutting machine, the winding using the press roll and the cutting material package after the roll into the winding paper core.