Do You Know The Main Maintenance Methods Of Rewinder Equipment

In the working process of rewinder, it needs professional and fixed personnel to carry out standardized operation, in which you need to master the startup and bag making procedures, learn simple instrument test, change the parameter configuration, etc.

Because the relevant parameter configuration of rewinding machine and equipment requires us to carry out work troubleshooting, so the daily cleaning and maintenance must be implemented in action. What are the basic cleaning of rewinding machine?

1. When the rewinder is shut down, it is necessary to clean the measuring parts in time, such as the packaged sugar, salt, etc., it is necessary to ensure that the blanking tray and turntable are cleaned every shift, so that the equipment will not be corroded even if it is used for a long time.

2. For the heat sealing body, it is necessary to clean it more often, which is also to ensure that the sealing texture of rewinder is clear.

3. The electric eye on rewinder also needs to be cleaned regularly, so as to ensure that the error of cursor tracking will not increase.

4. Workers need to clean up the scattered materials on the tray in time to avoid damage to the equipment.

5. Also remember to clean the dust in the electric control box regularly. In order to prevent the problem of poor contact, the newly installed rewinder needs to check and tighten the moving parts within one week of use, and add oil for maintenance.

Basic maintenance of rewinder:

1. For the regular inspection of the rewinder, we need to check the screws of all parts of the packaging machine in time to avoid loosening.

2. Rewinder should also pay attention to the electrical part of the waterproof, moisture-proof, anti-corrosion, anti rat problems. The electric control box and terminals should be kept clean.

3. Regularly add oil to the gear engagement, bearing oil injection hole and moving parts of rewinder to avoid failure.

Performance characteristics of rewinder:

1. Rewinder adopts PC control or manual control, which is reliable in performance and high in automation.

2. It can also lock the pre programmed process program, so that the operator can not change it without authorization, so as to ensure the quality of the pressed products.

3. The rewinder also has many functions, such as timing mold opening, automatic air release, automatic pressure supplement and so on.

4. There are three operation modes to choose from: manual, automatic and electric.