How To Use The High-speed Slitting Machine Flexibly?

Now many people can't use the high-speed slitting machine flexibly when they operate the high-speed slitting machine, which leads to the low working efficiency of the high-speed slitting machine or the normal operation of the high-speed slitting machine. So how can the high-speed slitting machine be used flexibly?

    Step 1: Before using the slitting machine, you should first remove all potential safety hazards in the operation site, pay attention to check whether all the data of the slitting machine are normal, check whether the voltage is normal, and whether the current is normal and stable.

    Step 2: Turn on the power switch of the hydraulic system of the slitting machine to check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable. Again, open the pneumatic shut-off valve of the slitting machine to check whether the air pressure is correct and stable.

    The third step: the setting control of the slitting machine and the paper tube machine, and the slitting menu is set according to the film type, thickness, length, width, etc. of the single organization of the slitting plan. Bring up the corresponding BOPP membrane dossier from the PDF. Set the winding length and width of the corresponding standard film. Select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the corresponding standard paper core.

    Finally: feeding the slitting machine and the paper tube machine, and threading the film. After all, it is the start-up operation and use control of the slitter.