Slitting machine
In our life, there are many applications of the slitter machine, such as packaging, home textiles, clothing and many other industries. It can cut silk, cloth and plastic weave very well. It uses automatic temperature control heating to carry out operations. When he is cutting, he can also make the cutting edge not to spread automatically to wind. Splitter he used stepless speed control, when cutting is relatively stable.
Slitting machine he used automatic edge, when we are cutting to be more smooth, cutting edge should also be very smooth, so that it can be very good to reduce the loss of edge material to the minimum. The sash machine also has automatic feed and retreat function. After cutting the cloth, it will automatically stop the machine, which is very good to improve the operability. If we want to work for a long time, then we should be very good to prevent the roller of the cutting knife from overheating. When the cutting material is started, we should open the cooling water pump, so that the roller can keep a certain low temperature.
The energy saving of the slitting machine is very good. We can let him directly control the temperature of the slitting knife. He does not need the thermal conductivity medium, so that the loss can be reduced to the minimum, and the performance will naturally go up.
Slitting machine
Is a kind of wide paper or film cut into a number of narrow material mechanical equipment, often used in papermaking machinery and printing and packaging machinery.
Before the cutting machine magnetic powder clutch speed can not be high, because it is easy to cause high speed friction of magnetic powder during operation, produce high temperature, shorten its life, serious will be stuck, so that the machine operation is blocked, bring serious consequences to the production. It has seriously affected the production efficiency.
The traditional control scheme of the slitter machine is to use a large motor to drive the rewinding shaft and add a magnetic powder clutch on the rewinding reel. By adjusting the current of the magnetic powder clutch, the resistance generated by the clutch is controlled to control the tension of the material surface. Magnetic powder clutch and brake is a special automatic actuator. It transmits torque through the magnetic powder filled in the working gap. Changing the excitation current can change the magnetic state of the magnetic powder, and then adjust the transmitted torque. It can be used for stepless speed regulation from zero to synchronous speed regulation. It is suitable for fine tuning of high speed section and small and medium power speed regulation system. Also used in unwinding or rewinding tension control systems that adjust torque by adjusting current to ensure constant tension during winding.
The main feature of the cutting machine is the magnetic powder clutch as a resistance device, through the system control, to output a DC voltage, control the resistance generated by the magnetic powder clutch. The main advantage is that it is a passive device and can control less tension.
Disadvantages: the speed can not be high, high-speed operation is easy to cause high speed friction of magnetic powder, high temperature, resulting in heating of magnetic powder clutch and shorten its life.
A device used for lengthwise cutting of rolls of a certain width into narrow strips by means of a cutter. After it is installed in the calendering machine or extruder, gluing machine and other unit devices, continuous strip cutting can be completed, often with winding device. The cutting knife can be flat blade knife or round edge knife

