The slitting machine has two gears, divided into manual gear and automatic gear. The operation has a precise mode and high precision. It can be divided into two different unwinding methods: surface unwinding and management center unwinding. When in use, the slitting machine selects the automatic support force mode, and uses the round blade to carry out the relative cutting of the goods. The quality of the products cut out is very qualified, and the adjustment of the goods is especially convenient. The rolling bearing surface layer of the slitting machine is selected to take the management center position of the face to carry out the winding, so that the quality of the selected roll is relatively symmetrical, and its reliability will be more balanced when used.
The slitting machine can automatically count the meters, and can also automatically adjust to the shutdown mode, which is very convenient to use. The machinery and equipment of the slitter should be installed in an area with moderate temperature, dryness, natural ventilation, good light source, and convenient operation. Keep the natural environment clean and tidy, and clean the equipment frequently to maintain tidiness. The slitting machine must use high-quality longitudinal and cross-cutting knives; the equipment must carry out the production and processing of the whole bundle or a whole piece of raw material. Part of the household appliances of the slitting machine must be inspected and cleaned frequently, and safety hazards must be cleaned up immediately; the rotating position must be inspected, cleaned and moisturized frequently, especially the spare parts must be inspected and replaced frequently.
In the case of operating the slitting machine, some key points need to be paid attention to during production to prevent safety accidents. Before starting the slitter, ensure that the working voltage, current, and hydraulic press are equivalent and stable. Before the slitter is ready for operation in advance, all staff must maintain a certain distance from the equipment to ensure the safety of their lives before they can be started. When the slitter is in operation, do not forcefully touch the film roll and the roll core in operation to prevent your hands from being rolled in, and do not touch the knife head to prevent scratches. Do not scratch the slitting machine with a knife or hard block, or scratch the roller core. In the event of an emergency during the operation process, you should immediately press and hold the emergency stop switch, and then deal with the abnormality.
The above explained are the advantages of the slitting machine and the operating precautions. I hope it will be helpful to you after reading it. If you want to know more about the slitting machine, please consult and we will be happy to provide you with Excellent service!