1. Rack and transmission system: The rack is composed of upper and lower board walls, supporting blocks and feeding machinery. The transmission system is mainly used for traction of raw materials and winding finished products. It is composed of a DC frequency conversion stepless electromagnetic speed control motor. The driving force makes the traction rubber stick run according to the electric motor's V-belt, and the main traction rubber stick and the driven traction rubber stick are close to each other and move the raw materials in the same step.
2. Rewinding mechanism and tension device: The rewinding mechanism is mainly composed of synchronous belt, synchronous wheel, magnetic powder clutch, and its inflatable shaft. The three elements of force are sent to the synchronous wheel by the synchronous belt, so that the magnetic particle detection clutch can be entered End shaft operation.
3. Traction component: The traction component is mainly composed of a pair of traction rubber rollers and several hard oxidized aluminum rollers, which can take the raw materials and move around for the winding of the finished product. Its driving force comes from the electric motor according to the V-belt. Pull the rubber stick actively to make it run.
4. Slitting knife holder: The slitting knife holder has round blade slitting and round knife slitting. The operating handle can make the round blade move a small amount of shaft diameter according to the plan view to adjust the circular cutting edge and the concave shape of the cushion cover The cutting gap of the groove.
5. Scrap rewinding and discharge: The waste is discharged according to the wind speed of the blower motor using the ventilation duct.
I hope it will be helpful to you after reading it. If you want to know more about the slitting machine, please consult, we will wholeheartedly provide you with quality service!